Modbus Heating Thermostat – Edge Series

Heatmiser edge offers a great upgrade route for those with an existing dial thermostat or for those looking to measure the temperature remote from the thermostat.

All to often thermostats are installed in a less than convenient place, resulting in the building being too warm or too cold. With Edge, a single or multiple Wireless Air Sensors can be paired to the thermostat. When multiple sensors are used, the average temperature is calculated and is perfect for larger open plan properties.

In addition to the wireless air sensor, a wireless window/door switch can be paired to the Edge Thermostat, automatically switching the heating to Standby Mode whilst the window/door is open and then returning to normal mode when the window/door is closed.

Two models are available in the Edge Series. edge is our 3A conventional heating model whereas the edge-e has been designed for electric floor heating. Both include Modbus connectivity and are compatible with our Wireless Air Sensor and Window / Door Switch.

Heatmiser edge

The Heatmiser edge is our 230v powered Thermostat that can be set to work as a non programmable, 5/2 day, 7 day or 24 hour programmable thermostat.

230v Powered
Modbus Network Function
Electric Floor Heating